ADC16 Trigger setup

tmcdonagh · Post by **tmcdonagh** » Tue Nov 11, 2003 10:08 pm

I would like to set up a trigger event with my ADC16 to collect data for a specified period of time. After the collection period, I would like for the unit to recycle, increment the filename, and wait for another trigger event before collecting data. Is it possible to use the ADC16 to accept a trigger event such as a contact closure?

Thanks,

Tom

markspencer · Post by **markspencer** » Wed Nov 12, 2003 11:41 am

Hi,

The ADC-16, is not capable of using triggers as its sample rate is only 1.5Hz, therefore it cannot be used in 'Fast Block' mode which is required for the trigger to be set.

Best regards,