4224 model and Labview

Post your LabVIEW discussions here
Post Reply
MAH2681
Newbie
Posts: 0
Joined: Mon Jun 05, 2006 7:07 pm

4224 model and Labview

Post by MAH2681 »

We are currently using the 3224 model and Labview 7.0, but are considering upgrading to a newer Picoscope model (4224). I found the downloads on the main site, but they seem to be in Labview 8.2. Is there anyway these can be posted here (or sent to me via e-mail) in version 7.0. We'd like to look them over before we purchase anything, if possible.

Thanks!
Using Labview 7.0

Robin
Advanced User
Advanced User
Posts: 558
Joined: Fri Sep 19, 2008 10:17 am

Re: 4224 model and Labview

Post by Robin »

Hi

Unfortunately we only have examples written in Labview 8.2 for the 4000 series. And 8.2 only allows you to go back as far as 8.0 when saving for a previous version.

Robin

MAH2681
Newbie
Posts: 0
Joined: Mon Jun 05, 2006 7:07 pm

Re: 4224 model and Labview

Post by MAH2681 »

Thanks for the note. Would you be able to post them anyway? I may be able to find someone to save them in the correct version I need.
Using Labview 7.0

Robin
Advanced User
Advanced User
Posts: 558
Joined: Fri Sep 19, 2008 10:17 am

Re: 4224 model and Labview

Post by Robin »

Hi

They are included in the SDK, which can be downloaded via

http://www.picotech.com/software.html

Robin

MAH2681
Newbie
Posts: 0
Joined: Mon Jun 05, 2006 7:07 pm

Re: 4224 model and Labview

Post by MAH2681 »

Thanks Robin, I have already downloaded them.
Using Labview 7.0

Post Reply