TC-08 locked

Forum for discussing PicoLog
Post Reply
Chaffeb

TC-08 locked

Post by Chaffeb »

I am using USB TC-08s, the problem starts when the computer is shut down improperly, or we lose power. When we restart the program, it will not locate the TC-08.

We start your program, Picolog recorder, shut it down, then open our program and it works fine.

Is there code I can use to restart the tc-08 without going thru your software to reset?

Robin
Advanced User
Advanced User
Posts: 558
Joined: Fri Sep 19, 2008 10:17 am

Re: TC-08 locked

Post by Robin »

Hi

Are you using a powered hub? If the device looses power (when the PC looses power), it will be reset and you should be able to open it using your software by calling the open function.

PicoLog uses the same API functions, so your software should be able to do everything that PicoLog does.

If your application exits without calling the close function, then you should power down (disconnect) the unit before opening it again.

Robin

Post Reply