current measurement ADC-24

Post any questions you may have about our current range of USB data loggers
Post Reply
gcam

current measurement ADC-24

Post by gcam »

I want to perform current measurements from one channel of the ADC-24 with full scale 2.5A what must precede the entrance of the channel one? Must use a shunt? what value?

Guest

Re: current measurement ADC-24

Post by Guest »

:?: [quote="gcam"]I want to perform current measurements from one channel of the ADC-24 with full scale 2.5A what must precede the entrance of the channel one? Must use a shunt? what value?[/quote] :?:



:lol: Sorry for my English. I rewrote the previous topic.
I would like to measure the current by means of the ADC24 device with a range of +- 2.5A.
What should I put before to obtain this measurement? Do I have to use a shunt? If so, what value do I have to use?

gcam

Re: current measurement ADC-24

Post by gcam »

Sorry for my english.

:shock: I solved the problem of measuring the current. there's a bug in the terminal board and terminal board manual. :shock:

bye!

olepagh
User
User
Posts: 7
Joined: Sat Jan 01, 2005 9:39 am
Location: Copenhagen, Denmark

Re: current measurement ADC-24

Post by olepagh »

gcam wrote: :shock: I solved the problem of measuring the current. there's a bug in the terminal board and terminal board manual. :shock:
Could you reveal to us ignorant amphibians what the bug is? :?:
/ Best regards
Ole
Denmark

Post Reply