Test and Measurement Forum

Measurements table empty/not updated in PicoScope 6

Post any questions you may have about our current range of oscilloscopes

Measurements table empty/not updated in PicoScope 6

Postby Edgar » Tue Mar 09, 2010 7:25 am

Hardware: PicoScope 4424
SW: PicoScope® 6 - PC Oscilloscope software version: 6.2.14.0

I have added two measurements on channel A: AC RMS and DC Average with the span Whole Trace. The fields for Min, Max, Average, Std and Capture Count are all empty. The field Value says "Not eneough data".

The signal on channel A is a sinewave with frequency 50Hz and amplitude +/- 2.5V.

The settings are: Collection time 10ms/div, Number of samples 1MS, Input range +/-5V, Trigger mode Auto.

Maximum Waveforms are set to 32 and Statiscs Captures are set to 20 (both are the default values)

Why is no measurements values shown????
Edgar
Newbie
 
Posts: 0
Joined: Tue Mar 09, 2010 7:08 am

Re: Measurements table empty/not updated in PicoScope 6

Postby PeterF » Wed Mar 17, 2010 10:41 am

Hi,
Please upgrade to version R6.3.43:-
http://www.picotech.com/software.html
Your software is quite out of date.
Regards,
PeterF.
PeterF
Zen Master
Zen Master
 
Posts: 435
Joined: Thu Jun 07, 2007 10:53 am
Location: Cambridgeshire


Return to USB PC Oscilloscopes

Who is online

Users browsing this forum: No registered users and 0 guests