Device not found p2105

Post any questions you may have about our current range of oscilloscopes
Post Reply
erosa08
Newbie
Posts: 0
Joined: Mon Feb 22, 2010 2:09 am

Device not found p2105

Post by erosa08 »

i connected my picoscope 2105 before installing the software. what steps should i take to correct this problem

User avatar
KennyM
Active User
Active User
Posts: 19
Joined: Mon Sep 15, 2008 5:51 pm

Re: Device not found p2105

Post by KennyM »

Assuming your running on Windows XP 32 bit....

This worked for me...

Leave the scope attached to the PC, then right click on 'My Computer' and select 'manage', the select 'device manager' and look for a device under 'USB' which has yellow bang ("!") against it. Right click this and select 'uninstall'.

Now remove the scope from the PC and install the software.
Attach the scope at the appropriate time.

I hope this helps.

Kenny M.
-Kenny M.

erosa08
Newbie
Posts: 0
Joined: Mon Feb 22, 2010 2:09 am

Re: Device not found p2105

Post by erosa08 »

I have windows vista 32 bit. When i plug in my picoscope i could see the picoscope 2000 name appear at device manager but it does not have the yellow sign. As soon as i run the program for picoscope 6 it disappears from the device manager list. Also, if i uninstall it using device manager and then reinstall it using window it also disappears from the device manager list. Any help please...

erosa08
Newbie
Posts: 0
Joined: Mon Feb 22, 2010 2:09 am

Re: Device not found p2105

Post by erosa08 »

I figured it out. When i uninstall my device driver and unplug it and replug it, windows would ask if i wanter to finish the softaware driver installation. I would normally hit yes, but this time i hit no and it finally worked.

Post Reply