current Monitor EL040 / Data Logger EL 005

Having problems ? let us know the details here
Post Reply
Guest

current Monitor EL040 / Data Logger EL 005

Post by Guest »

Can someone please explain how i change the sacale of the graph and other information in Evironmon when using the 10mV/A setting on the current transudcer?

i can get measurement perfectly when using the 1mV/A setting but on the 10mV/A all data is multiplied by 10, i want to use this setting in a lower current ranges so need to be more sensitive.

Thanks

PeterF
Advanced User
Advanced User
Posts: 435
Joined: Thu Jun 07, 2007 10:53 am
Location: Cambridgeshire

Re: current Monitor EL040 / Data Logger EL 005

Post by PeterF »

Hi,
There is no way to alter the scaling in the current converter. It was originally designed for a current clamp that only had one setting. Later clamps came with a x10 setting but the converter and software know nothing about that! You will have to make a mental note to adjust all readings later, Sorry!
Regards,
PeterF.

Post Reply