Measure high vltage signal

Post any questions you may have about our current range of oscilloscopes
Post Reply
bentl
Newbie
Posts: 0
Joined: Sun Feb 21, 2010 8:16 pm

Measure high vltage signal

Post by bentl » Sun Feb 21, 2010 8:19 pm

Hi,

I have a PicoScope 2104

I need to measure a 500V AC signal; kan I use a high voltage probe 1/1000 or will it ruin the signal? Requency I will measure is 5 - 25kHz

regards

Bent

PeterF
Advanced User
Advanced User
Posts: 435
Joined: Thu Jun 07, 2007 10:53 am
Location: Cambridgeshire

Re: Measure high vltage signal

Post by PeterF » Fri Apr 09, 2010 10:10 am

Hi,
You could use one of our TA041 isolated, differential probes but it is not easy to maintain a good connection to a PS 2104 with the necessary adapters. Please do not try to use the 2104 with a grounded 1000:1 probe, especially on mains voltages.
Regards,
PeterF.

Post Reply