Recording from two ADC 24s

Post any questions you may have about our current range of USB data loggers
Post Reply
Barry Hall
Newbie
Posts: 0
Joined: Mon Jan 25, 2010 3:50 pm

Recording from two ADC 24s

Post by Barry Hall » Mon Jan 25, 2010 4:42 pm

I can display the output from two ADC 24 units but the spreadsheet will only display 16 channels. I have used the "select parameter" dialogue but it reverts back to the first 16 channels.

Assistance gratefully received.

Regards,
Barry

PeterF
Advanced User
Advanced User
Posts: 435
Joined: Thu Jun 07, 2007 10:53 am
Location: Cambridgeshire

Re: Recording from two ADC 24s

Post by PeterF » Wed Jan 27, 2010 1:10 pm

Hi Barry,
You need to divide your multiple channels up into groups of channels with no more than 16 in each group. PicoLog can only display 16 channels at a time in spreadsheet mode (20 in graph mode). Give each group a name and call it up to display one group at a time. Here is the text from the "Help" available in the "Select parameters" dialog:-
...................................................................
This dialog box is used to select the measurements which will be displayed in a window.

Group. At the bottom is the Group list box. You can use this to save and restore a number of named groups of measurements.

To save the current measurement selection as a group, type the group name and click Save.

To select a saved group, open the list box and double-click the requested group.

To modify an existing group, make the changes to the measurement selection then type the group name and click Save.

To remove an existing group, deselect all measurements, type the group name and click Save.
..............................................................
Regards,
PeterF.

Post Reply