Save different startup setting

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
klc
Active User
Active User
Posts: 18
Joined: Thu Sep 20, 2007 8:55 am
Location: Denmark
Contact:

Save different startup setting

Post by klc » Thu Jan 21, 2010 8:42 am

Now you can only save last used setup.
Would it be possible to save different startup setting.
PicoScope 3424 owner.

gruntman
Advanced User
Advanced User
Posts: 109
Joined: Thu Sep 28, 2006 3:50 pm

Re: Save different startup setting

Post by gruntman » Thu Jan 21, 2010 8:32 pm

KLC,

You are limited to loading only one default start up setting. A quick and easy work around for this however is to save your default settings for your tests as either .psdata's or .pssettings and then when you need to do these tests you simply load these files and the software will reload the needed settings...

Regards,

Richard Boyd
Crag Technologies, Inc
http://www.pc-oscilloscopes.com

Post Reply