Test and Measurement Forum

USB PC Data Logger, from RS 485 Networks, using 2203 model

Post any questions you may have about our current range of USB data loggers

USB PC Data Logger, from RS 485 Networks, using 2203 model

Postby pappuneelam » Tue Jan 12, 2010 7:34 am

Can I use my PicoScope 2203, to capture Data Packets from RS 485 network, through the Probes provided with my PicoScope 2203 ? If YES, how to capture ?

Please help me !!!!

Pappneelam
pappuneelam
Newbie
 
Posts: 0
Joined: Fri Jan 08, 2010 1:38 pm

Re: USB PC Data Logger, from RS 485 Networks, using 2203 model

Postby gruntman » Wed Jan 13, 2010 6:08 pm

Pappneelam,

To view an RS-485 signal you need to connect Channel A to RS485+ and ground and connect Channel B to RS485- and ground and view them in PicoScope 6...

It depends on what information you are after as far as to if the PS-2203 is the right choice as far as scopes go...

Regards,

Richard Boyd
Crag Technologies, Inc
http://www.pc-oscilloscopes.com
gruntman
Guru
Guru
 
Posts: 109
Joined: Thu Sep 28, 2006 3:50 pm

Re: USB PC Data Logger, from RS 485 Networks, using 2203 model

Postby pappuneelam » Thu Jan 14, 2010 7:25 am

Thankz for responding Sir !!!!

Can I capture the Data Packets in 0 / 1 format, i use 115200 baudrate for transferring. So, the bit speed is 8.68 microSecond. What is the best set for my picscope-2203. I am novice in this Digital Oscilloscope.

I need ur kind assistance.

Pappuneelam
India
pappuneelam
Newbie
 
Posts: 0
Joined: Fri Jan 08, 2010 1:38 pm


Return to USB PC Data Loggers

Who is online

Users browsing this forum: No registered users and 1 guest