Data Logging using PicoScope 2203, from RS485 Network

Post any questions you may have about our current range of USB data loggers
Post Reply
pappuneelam
Newbie
Posts: 0
Joined: Fri Jan 08, 2010 1:38 pm

Data Logging using PicoScope 2203, from RS485 Network

Post by pappuneelam »

Hello All !!
Mine have PicoScope 2203. I want to capture row data in Binary format, using PicoLog software R5-20-8. But, i am quite uncertain about, if it can be possible. I need to capture from RS 485 network. Please help me.

pappuneelam

Pico Stuart
Site Admin
Site Admin
Posts: 78
Joined: Tue Jun 30, 2009 3:08 pm

Re: Data Logging using PicoScope 2203, from RS485 Network

Post by Pico Stuart »

Dear Pappuneelam,

Thank-you for your inquiry with regard to using 2203 .The 2203 will operate in both our Logging software and Oscilloscope software.

Due to your required sample rate PicoLog will not be suitable for RS485 data logging

You could possibly use PicoScope to capture your RS485 data. If you require further assistance please do not hesitate to contact me at support@picotech.com

Kindest regards,

Stuart
Technical Specialist

Post Reply