I'm having trouble installing PicoScope for my ADC-42 on Windows 7 64-bit. When I installed R5.20.9 the product list didn't have the ADC-42 so I installed as a demo with the "install for other devices" option checked. Then I changed the device to ADC-42 with File > Setup > Converter. When I restarted the program I got the error "adc1032.dll not found". I then installed R5.20.9 on a second computer running Windows 7 32-bit and copied the adc1032.dll file over to the first computer. Now when I start PicoScope I get the error "ADC-42 not connected".
The parallel port is set to SPP mode and both it and PicoScope are set to use LPT1. I also tried R5.16.2 but it wouldn't install on 64-bit, and R6.2.20 but it didn't support the ADC-42. Is there anything else I can try to get this thing working?
Problem with ADC-42 on Windows 7 x64
Re: Problem with ADC-42 on Windows 7 x64
Hi unfortunately there is no support for this product on a 64 bit operating systems. These products were designed in the days of DOS and windows 95.
Kind regards
Kind regards
Ziko
Technical Specialist
Technical Specialist
Re: Problem with ADC-42 on Windows 7 x64
Alright, well I can run it in a 32-bit virtual machine if I have to. Thanks for your help.
Re: Problem with ADC-42 on Windows 7 x64
Hmmm, post back here if you have any luck doing this...I couldn't get the parallel port to be seen by Windows XP virtual mode running under Win7-64.Guest wrote:Alright, well I can run it in a 32-bit virtual machine if I have to.
Re: Problem with ADC-42 on Windows 7 x64
Hi ! Any success with x32 virtual machine trial? Thanks in advance!