Test and Measurement Forum

usb driver for ps2000

Post general discussions on using our drivers to write your own software here

usb driver for ps2000

Postby krishanaswamy » Thu Nov 05, 2009 4:01 pm

hello,
i am programming using the labview 8 for the serial port. but in the recent times when ever i program for serial port the serial port got damaged. now i want to get the output through the usb connector. please send u r feed back to me about this.
i need driver for getting the output through usb using the labview...


regards....
krishanaswamy
Newbie
 
Posts: 0
Joined: Tue Nov 03, 2009 6:08 am

Re: usb driver for ps2000

Postby gruntman » Thu Nov 05, 2009 5:16 pm

Hello,

Unfortunately, you cannot control the USB port on a computer like you can with a serial port. With USB you must have a device connected to the computer in order to output any type of signal. What type of signal are you looking to output? The PS2203 would have the capability to connect via USB, output a ±125 mV to ±2 V pk-pk signal that you can define and is controllable in the LabVIEW programming environment.

Regards,

Richard Boyd
Crag Technologies, Inc
http://www.pc-oscilloscopes.com
gruntman
Guru
Guru
 
Posts: 109
Joined: Thu Sep 28, 2006 3:50 pm


Return to General Software Discussions

Who is online

Users browsing this forum: No registered users and 0 guests