2204 Oscope

Post any questions you may have about our current range of oscilloscopes
Post Reply
tomroth
User
User
Posts: 2
Joined: Wed Jul 15, 2009 2:02 am

2204 Oscope

Post by tomroth » Sat Oct 24, 2009 2:48 am

The spec say it can handle +/-20V. Is that Vrms, Vp, or Vpp?

Thanks!!!

Robin
Advanced User
Advanced User
Posts: 558
Joined: Fri Sep 19, 2008 10:17 am

Re: 2204 Oscope

Post by Robin » Tue Oct 27, 2009 9:07 am

Hi

It is the instantaneous voltage. If your signal exceeds this it will be clipped at either +20 V or -20 V.

You can use x10 probes if you need to measure higher voltages.

Robin

Ceres
Newbie
Posts: 0
Joined: Fri Feb 05, 2010 3:11 pm

Re: 2204 Oscope

Post by Ceres » Fri Feb 05, 2010 3:16 pm

Hi Robin,
Based on what you are saying, scope 2204 with voltage probe set to x10 is it possible to measure voltage up to 200V?

Thanks
Mauro

Robin
Advanced User
Advanced User
Posts: 558
Joined: Fri Sep 19, 2008 10:17 am

Re: 2204 Oscope

Post by Robin » Mon Feb 08, 2010 4:47 pm

That's correct. However, these probes are NOT suitable for measuring mains. See the following page for our isolated differential probes:

http://accessories.picotech.com/active- ... robes.html

Robin

Post Reply