PT-104 protocol error

Post general discussions on using our drivers to write your own software here
Post Reply
keystoneclimber
Newbie
Posts: 1
Joined: Thu Oct 01, 2009 5:39 pm

PT-104 protocol error

Post by keystoneclimber » Thu Oct 01, 2009 5:52 pm

The PT-104 version response at start-up is defined as:
Byte Value
1 xFF
2 xAA
3 x55
4 x68 Product type
5 x10 Version

In practice, I get:
Byte Value
1 xFF
2 x55
3 xAA
4 x68 Product type
5 x11 Version

It seems that the units shipped have bytes 2 & 3 switched.

ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Post by ziko » Mon Oct 12, 2009 10:28 am

Hi yes I have confirmed what you are saying is correct I have tried it myself. I have reported this as a bug report and on the manual will be modified. Thank you.

Kind regards
Ziko

Technical Specialist

Post Reply