PicoScope 7 Software
Available on Windows, Mac and Linux
PicoScope 7 Software
Available on Windows, Mac and Linux
OEM & custom applications
PicoScope, Pico data logger and RF products can be used as components in custom applications and OEM projects.
A to Z of PC oscilloscopes
Everything you need to know about PC oscilloscopes from Advanced Triggers to Zooming.
A to Z of Data Loggers
Everything you need to know about PC-based data loggers from Alarms to Zooming.
Application Notes
Details of some of the many applications for Pico data logger and oscilloscope products.
How do I measure...?
Find out how you can measure using Pico products
Videos
Showing you how to get the most out of PicoScope oscilloscope software.
Documentation
Up-to-date versions of the documentation supplied with your products in PDF format.
Educational Experiments
Our library of science experiments suitable for use with oscilloscope and data logging products.
PicoApps
Want to share hints, tips and code with other developers? Show your Pico-based products to the world.
Newsletter
Archive of our monthly Test and Measurement Newsletters.
This does not make sense! If the range is -100 to +100, then -50 would be one-quarter of the way into the block, not half way, and 0% would be the middle not the start!delay, the delay, as a percentage of the requested number of
data points, between the trigger event and the start of the block. It should be in the range -100% to +100%. Thus, 0% means that the trigger event is at the first data value in the block, and -50% means that it is in the middle of the block. If you wish to specify the delay as a floating-point value, use ps2000_set_trigger2()
instead.
Return to “General Software Discussions”