I'm using a PT-104 with two PT100 sensors in a water bath. I also have some thermocouples in the bath. The water bath temperature is controlled so that it is at 30C, then 35C, 40C, 45C, waiting for around 1/2 hour at each temperature.
The problem is that when changing from one temperature to a higher temperature the PT104 readings seem to have got 'stuck' at the lower temperature. eg the water bath takes ~1 minute to heat up from 30C to 35C, but 10 minutes later the PT100s are both still reading 30C. Then suddenly, they both jump to reading 35C, and appear to be correct at that point.
Looking more closely at my logged data, it is apparent that the PT104 is failing to update the PT100 values for periods of up to 10 or 20 minutes. (This during a 6 hour run).
What is the cause of Picolog failing to update values?
I'm connecting the PT104 directly to a serial port on my laptop. The computer was running only a few programs - Outlook, Google Chrome, and normal background processes (antivirus etc).
Having analysed my data further, I've found other problems. The logging interval is 1 second, but the time in seconds in the datafile is discontinuous. There are jumps where no data is recorded, jumps where zeros are recorded, and large swathes of data with the same time repeated.
I've attached a zip of the csv file saved from the spreadsheet view. The raw data file is too large to attach, even when zipped.