TC-08 serial connection

Post any questions about our serial port products
Post Reply
Geoffthegas
Newbie
Posts: 1
Joined: Sun Jul 12, 2009 9:50 am

TC-08 serial connection

Post by Geoffthegas »

Running picolog through excel uses up CPU 100%
Anyway around this
I have bang up to date version of pico software (12/07/09)

Pico Stuart
Site Admin
Site Admin
Posts: 78
Joined: Tue Jun 30, 2009 3:08 pm

Post by Pico Stuart »

Dear Geoff,

Further to your inquiry about the CPU usage percentage. This is normal. The usage is affected by sample rate and is PC specification dependant.

The lower the sample rate the lower the CPU usage. Unfortunately there is no work around for this.

Kindest regards,

Stuart

Steflibreville
Newbie
Posts: 1
Joined: Fri Dec 30, 2011 8:57 am

Re: TC-08 serial connection

Post by Steflibreville »

Hi Every one,
I used a TC08 serial with many computers: new , old, and it was ok
I try to use this device with a HP vectra VL400 and the data logger cannot connect on the TC08 and it is requesting the driver V2.6.
What can I do ?
Thank you

Hitesh

Re: TC-08 serial connection

Post by Hitesh »

Hi,

Please could you provide the following information:
  • Operating system.
  • If you are using a USB - Serial converter.
  • The version of PicoLog you are using.
If you have a USB - serial converter, did you install the software, connect the cable, then connect the device?

Thanks,

Steflibreville
Newbie
Posts: 1
Joined: Fri Dec 30, 2011 8:57 am

Re: TC-08 serial connection

Post by Steflibreville »

Dear All,
It is working now. I had a cble problem between computer and TC08 terminal. I ma using a pair of RS232/RS422 converter in order to increase the distance. The problem was between the 2 converters.

It is working well now.

Thank you
regards.

Post Reply