Test and Measurement Forum

Custom probe troubles

Forum for discussing PicoScope version 6 (non-automotive version)

Custom probe troubles

Postby hbraasch » Tue Jul 07, 2009 1:20 pm

I am having trouble with the most basic aspect of custom probes. I am even having trouble getting the "built-in" probes to work as expected. Using PicoScope 6.2.2.12 in demo mode, by selecting different "built-in" probes I expect the display output to change. I see no differenves after the change. Is this a finger trouble issue, my misconception or a bug?

Assistance of any sort shall be much appreciated.

Thanks a lot.
hbraasch
User
User
 
Posts: 2
Joined: Tue Jul 07, 2009 12:22 pm
Location: Cape Town

Problem resolved!

Postby hbraasch » Tue Jul 07, 2009 1:42 pm

Problem resolved and I am a bit embarrassed! I changed the probe on channel B, while looking at the data from channel A. Did not notice there were two similar icons on the toolbar.

Regards and thanks.
hbraasch
User
User
 
Posts: 2
Joined: Tue Jul 07, 2009 12:22 pm
Location: Cape Town

Postby Robin » Tue Jul 07, 2009 1:51 pm

Hi

I'm glad you solved your problem! As you have discovered, different probes can be selected for each channel and you will get a channel options button for each channel on your device.

Robin
Robin
Zen Master
Zen Master
 
Posts: 558
Joined: Fri Sep 19, 2008 10:17 am


Return to PicoScope 6 for Windows

Who is online

Users browsing this forum: No registered users and 0 guests