Updating Time Fail

Having problems ? let us know the details here
Post Reply
Maiz
User
User
Posts: 2
Joined: Thu Jun 25, 2009 9:26 am
Location: Kent

Updating Time Fail

Post by Maiz » Thu Jun 25, 2009 10:07 am

Hi,

I am currently having trouble programming the EL005 EnviroMon Data Logger. The logger is brand new and I am using it for the first time.

I have directly connected an EL001 convertor to the logger and an EL015 sensor to the converter. I am able to communicate with the logger and use auto-configure to recognise the convertor. However when I press program from the configuration control panel it starts to download the inormation to the logger but it always crashes out and displays the message "Updating time Operation failed"

Can anybody help!!

Best regards,

Maiz
Maiz

ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Post by ziko » Thu Jun 25, 2009 10:41 am

Hi you will need to do a logload to the logger, full instructions can be found on the link below:

http://www.picotech.com/support/viewtopic.php?t=4038

Kind regards
Ziko

Technical Specialist

Maiz
User
User
Posts: 2
Joined: Thu Jun 25, 2009 9:26 am
Location: Kent

Thank You!!

Post by Maiz » Thu Jun 25, 2009 10:56 am

Hi Ziko,

Thats worked perfectly.

Really appreciate your help.

Best regards,

Maiz
Maiz

Post Reply