Lowpass Filter option not enabled

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
ffortino
User
User
Posts: 8
Joined: Wed Jan 16, 2008 4:17 pm

Lowpass Filter option not enabled

Post by ffortino »

I am using XP Pro; with 6.6.6.12; with 3224 scopes
What disables the LowPass Filter option ?
How can I enable it ?

Thanks

ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Post by ziko »

Hi well there are two ways of filtering, either you choose a resolution enhancement or under the channel options button you choose Low pass filtering. Both these should be off by default.
Ziko

Technical Specialist

pstudier
Newbie
Posts: 1
Joined: Thu Jun 18, 2009 4:31 am

Post by pstudier »

I am using PicoScope version 6.2.2.12 with the PicoScope 2205. When I select the channel options, I see "Resolution Enhance" and "Axis Scaling" and "Lowpass Filtering" but the check box to "Activate Filter" is grayed out and it won't allow me to check it.

ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Post by ziko »

Yes this feature is not available on the 2205.
Ziko

Technical Specialist

Post Reply