Test and Measurement Forum

TC-08 LED Flashing

Post any questions you may have about our current range of USB data loggers

TC-08 LED Flashing

Postby dustinsanchez » Thu Jun 11, 2009 5:31 pm

This is the first time I have used my TC-08 logger and I believe I have the set up correct. I observed that the LED continually flashes red, green, red, green.......
I have been told this is normal. Does anyone know why this happens and if it indicates incorrect settings. I am measuring temperature on 6 of the 8 available channels.
Thanks in advance.
Dustin
dustinsanchez
Newbie
 
Posts: 1
Joined: Thu Jun 11, 2009 5:28 pm
Location: Manassas, VA

Postby Robin » Fri Jun 12, 2009 7:56 am

Hi

Yes, this is normal. The LED goes red when the unit is opened and green when data is being transferred.

Robin
Robin
Zen Master
Zen Master
 
Posts: 558
Joined: Fri Sep 19, 2008 10:17 am

Re: TC-08 LED Flashing

Postby ElvisUnknow » Thu May 24, 2012 8:01 am

I have been using the PL1216 for a few weeks now, and now when I plug it in, the LED starts blinking and doesn't stop.
ElvisUnknow
Newbie
 
Posts: 0
Joined: Thu May 24, 2012 7:55 am

Re: TC-08 LED Flashing

Postby Martyn » Thu May 24, 2012 11:36 am

Does it still work with the software ?
Martyn
Technical Specialist
Martyn
Site Admin
Site Admin
 
Posts: 2355
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots


Return to USB PC Data Loggers

Who is online

Users browsing this forum: No registered users and 0 guests