Enviromon to EL001 communication

Having problems ? let us know the details here
Post Reply
Posts: 1
Joined: Sat Jun 06, 2009 2:26 pm
Location: Kent

Enviromon to EL001 communication

Post by BandY » Sat Jun 06, 2009 2:42 pm

I have connected 1 EL001 to an EL005 and programmed the EL001 channels as door contacts for simplicity but have no switch status logs recorded. I can record internal values such as network current which increases with the EL001 attached and the EL001 LED blinks at the required rate mostly dim with occassional bright flashes. Any ideas?

Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Post by ziko » Mon Jun 08, 2009 12:37 pm

Hi do you have any sensors connected to the EL001? If not then you will not see any readings.

The EL001 can be used to measure temperature with the EL015 thermistors or it can be used with a door switch.


Let me know if you have any further questions.

Kind regards

Technical Specialist

Post Reply