PT 104 thermocouple connection

Having problems ? let us know the details here
Post Reply
Guest

PT 104 thermocouple connection

Post by Guest » Mon Apr 20, 2009 6:52 pm

I know that PT 104 is for PRTs. But I may have to use a thermocouple in some cases. How can I convert the signal then?

Thank you.

Robin
Advanced User
Advanced User
Posts: 558
Joined: Fri Sep 19, 2008 10:17 am

Post by Robin » Tue Apr 21, 2009 8:57 am

Hi

To measure the temperature using a thermocouple, you need a cold-junction-compensation circuit. See http://www.picotech.com/applications/thermocouple.html for more information.

Robin

Guest

Post by Guest » Wed Apr 22, 2009 10:47 pm

Hey,

I found a scaling file in the picolog, "type_K.scl", can I make use of this with a K-type thermocouple? How about the connection? which DIN's should I use?

Thank you.

Robin
Advanced User
Advanced User
Posts: 558
Joined: Fri Sep 19, 2008 10:17 am

Post by Robin » Thu Apr 23, 2009 8:25 am

Yes, but you would still need cold-junction compensation. It would be much easier to use a TC-08, which is designed for use with thermocouples.

Post Reply