12 Channel Mixmaster hook up on 6cyl DIS

Having problems ? let us know the details here
Post Reply
Guest

12 Channel Mixmaster hook up on 6cyl DIS

Post by Guest »

I am looking for a diagram or lead connection chart to connect the 12 Channel signal mixer to a V-6 engine with DIS and to the scope. I can't find anything on the site. My questions are specifically about the B and overscore B switch and the A and A+B switch. What positions do these go in?

Also the leads for the scope input, I have trigger out, A/A+B out and B out. how do these get connected to the Channel A and B on the scope.

Thanks![/u]

User avatar
Autonerdz
Advanced User
Advanced User
Posts: 141
Joined: Wed Nov 20, 2002 4:19 pm
Location: Washington State USA
Contact:

Manual

Post by Autonerdz »

Here is a link to the Mixmaster manual:

http://www.picotech.com/document/pdf/mixmaster.pdf

Place the negative fired cylinders on one bank of the Mixmaster and the positively fired ones on the other bank.

The position of the A/A+B switch depends on how you want to view the signals. The A position splits the ignition output between the A and B outputs of the Mixmaster. The A+B position outputs both banks on A.

The B/over-score B switch inverts the B bank in the over-score B position. You can also accomplish this with PicoScope by choosing the appropriate custom probe if you split banks. You will need to use this switch if outputting all on A so they can all be oriented the same.

The A/A+B out can go to channel A on the scope and B out to channel B. You can then use ch C for trigger out. It will output the signal for the cylinder placed in the Bank A #1 position.

_________________
Tom Roberts
(The Picotologist)
http://www.autonerdz.com
skype: autonerdz
THE PicoScope Automotive Authority
In North America

Post Reply