Logging pulses with a ADC11

Which product is right for your exact requirements
Post Reply
Guest

Logging pulses with a ADC11

Post by Guest »

I want to log and totalise 100ms pulses every quarter of an hour.

The pulses are from an electricity meter and are on average about 1 per sec.

Can I use my ADC11 and Picolog software to do this? Can't see an obvious way

ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Post by ziko »

Hi using PicoLog, you can get the unit to repeat recording after a delay or immediately. If you use the device in fast block mode you can then get it to start recording on a trigger event.

Let me know if you require further info.

Kind regards
Ziko

Technical Specialist

Post Reply