Test and Measurement Forum

Changing details after a measurement

Forum for discussing PicoLog

Changing details after a measurement

Postby peterb » Thu Jan 15, 2009 11:32 am

I completed a test and found that the I had set the inputs and calculated parameters incorrectly for two channels.

Is there a way I can correct the details and calculate new figures in PicoLog or do I have to export the raw data to Excel and do it that way?

Thanks

Peter
peterb
Active User
Active User
 
Posts: 6
Joined: Fri Apr 18, 2008 10:28 am
Location: Malvern WORCS UK

Postby ziko » Thu Jan 15, 2009 1:27 pm

Hi Peter you can use the calculated parameters option and put your adjustments there.

Kind regards
Ziko

Technical Specialist
ziko
Zen Master
Zen Master
 
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Postby peterb » Mon Jan 19, 2009 10:44 am

The calculated parameters can be changed but how about the titles of the inputs?
I have a couple of recordings where they were guessed, incorrectly, and I now need to correct them.

Cheers
peterb
Active User
Active User
 
Posts: 6
Joined: Fri Apr 18, 2008 10:28 am
Location: Malvern WORCS UK

Postby ziko » Mon Jan 19, 2009 11:17 am

Hi peterb,

You cannot change the titles of the inputs, if you use calculated parameters, in effect i adds extra channels. My point is you can use those extra channels with your corrections as if they are your main channels.

Hope this helps.
Ziko

Technical Specialist
ziko
Zen Master
Zen Master
 
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Postby peterb » Mon Jan 19, 2009 11:25 am

OK so I can use Parameters to 'rename' them, but I do not know which input socket was which.

Is there anyway I can get that information out of the file, or I just have to guess that the order the yare listed is the order of the inputs?

Cheers
peterb
Active User
Active User
 
Posts: 6
Joined: Fri Apr 18, 2008 10:28 am
Location: Malvern WORCS UK

Postby ziko » Thu Jan 22, 2009 4:50 pm

Hi Peter,

Having spoken to the software engineers to confirm my suspicions, the only way I would recommend doing it is by connecting the logger to the computer and selecting "file" -> "new data"and saving as a different name, then selecting Input channels and editing the named channels this way it will show which channel is associated with which name.

Hope this helps
Ziko

Technical Specialist
ziko
Zen Master
Zen Master
 
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots


Return to PicoLog

Who is online

Users browsing this forum: No registered users and 1 guest