Persistence mode scale wrong with 10x probe

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
Posts: 2
Joined: Tue Dec 16, 2008 8:05 am

Persistence mode scale wrong with 10x probe

Post by sv2dgi » Tue Dec 16, 2008 8:11 am

I set Scope mode, probe 10x +-2V, and I display a sine wave...

I turn to Persistence mode, and it sets 1x probe, 200mV and I get the same display. It makes sense.

Now when I try to switch to 10x and 2V inside persistence mode the sine gets so large that it clips. I have to switch to more than 20V scale for it to display properly...

Something is wrongly scaled here... Somehow persistence mode does not take into account the scaling...


Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Post by ziko » Tue Dec 16, 2008 11:22 am

Hi sv2dgi,

I have managed to recreate your problem and have reported it as a bug report.

Kind regards

Technical Specialist

Post Reply