Test and Measurement Forum

Connecting pH sensor to the ADC-20/ADC-24 Terminal Board

Post any questions you may have about our current range of USB data loggers

Connecting pH sensor to the ADC-20/ADC-24 Terminal Board

Postby wesley » Wed Sep 17, 2008 1:04 pm

I recently bought the ADC-20 Terminal Board and a pH sensor. The pH sensor has a different connection, than the screw terminals on the Terminal board.
Is it possible to cut of the pH sensors connection port, and than put the wires of the pH sensor in the terminal Board ?
wesley
Newbie
 
Posts: 1
Joined: Wed Sep 17, 2008 12:33 pm

Postby picojohn » Thu Sep 18, 2008 3:04 pm

Hello Wesley,

The pH sensor is not suitable for direct connection to an ADC-20/24; you would need to design and construct an electronic interace circuit.

We sell the pH probe for use with the DrDAQ educational product http://www.drdaq.com/index.html

Regards
John
picojohn
Zen Master
Zen Master
 
Posts: 382
Joined: Mon Jun 11, 2007 1:10 pm


Return to USB PC Data Loggers

Who is online

Users browsing this forum: No registered users and 0 guests