PicoScope 5.20.1 - and my own written program as well -
can not start twice, on an ADC-11 USB.
I have to disconnect the USB cable in order to start PicopScope,
or my own program again, or restart the PC.
Both "fixes" are NOT acceptable.
In PicoScope the "Time-line" in the bottom of the program window/form,
runs to the very/right end, and then keeps waiting, until
I unlplug the USB cable.
A restart after this, makes the program run.
Seems to be a Pico-driver/USB related issue.
As this issue can be shown, using Picoscope alone, it must be a
Pico Technology issue.
Running on an XP SP2 32 bit pc.
My application can not be invoiced to my customer,
with this bad behavior