interface problme EL 037

Having problems ? let us know the details here
Post Reply
Guest

interface problme EL 037

Post by Guest » Tue Jul 29, 2008 10:03 pm

Hi ,we having problem wiht enviromon system
EL 005 connect with EL 037 Converter.
we set the voltage to 2.5 V to Measure Output (0-60 mv).
we Notice the following :
!) we getting 1197.60mv but actual should be 5 mv ?
2) we getting 1436.30mv but actual should be10 mv ?
inaccurate we found

it seen to be match problem ! Kindly advise .
any Better to isolated or match it up ?

tq
willie

picojohn
Advanced User
Advanced User
Posts: 382
Joined: Mon Jun 11, 2007 1:10 pm

Post by picojohn » Wed Jul 30, 2008 8:16 am

Hello willie,

Have you configured the EL037 according to section 3.4.5 of the EnviroMon user guide http://www.picotech.com/document/pdf/emw044.pdf ?

Regards
John

Guest

el005 system

Post by Guest » Thu Jul 31, 2008 11:14 pm

yes , we follows exactly from manual .

picojohn
Advanced User
Advanced User
Posts: 382
Joined: Mon Jun 11, 2007 1:10 pm

Post by picojohn » Fri Aug 01, 2008 9:02 am

What is the source of your signal and how have you demonstrated that the problem lies with the EL037 rather than your signal?

Regards
John

Post Reply