Arbitrary waveforms with frequencies below 1Hz

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
grafiks
User
User
Posts: 2
Joined: Mon Jul 21, 2008 4:20 pm

Arbitrary waveforms with frequencies below 1Hz

Post by grafiks »

Hi,

I recently bought a PicoScope 2203 and wanted to use the AWG with a long arbitrary waveform (>1s, i.e. <1Hz). In the AWG settings the lowest frequency is 1Hz and typing anything like 0.1Hz is not possible. Is there any possibility to change that lower range, or is it technically impossible?

Thanks for any suggestion,
Kay

picojohn
Advanced User
Advanced User
Posts: 382
Joined: Mon Jun 11, 2007 1:10 pm

Post by picojohn »

Hello Kay,

That is as low as you may go with the PS2203/4/5.

Regards
John

grafiks
User
User
Posts: 2
Joined: Mon Jul 21, 2008 4:20 pm

Post by grafiks »

Thanks for the quick reply John,

so maybe I should upgrade to another Pico Product. How about the 3000/5000 series, will they do the job (could not find any specs on that topic in the manual).

Best regards,
Kay

picojohn
Advanced User
Advanced User
Posts: 382
Joined: Mon Jun 11, 2007 1:10 pm

Post by picojohn »

Kay,

The PS5203/4 may be set to 0.03 Hz from within PicoScope 6.

Regards
John

Post Reply