Test and Measurement Forum

Arbitrary waveforms with frequencies below 1Hz

Forum for discussing PicoScope version 6 (non-automotive version)

Arbitrary waveforms with frequencies below 1Hz

Postby grafiks » Mon Jul 21, 2008 4:45 pm

Hi,

I recently bought a PicoScope 2203 and wanted to use the AWG with a long arbitrary waveform (>1s, i.e. <1Hz). In the AWG settings the lowest frequency is 1Hz and typing anything like 0.1Hz is not possible. Is there any possibility to change that lower range, or is it technically impossible?

Thanks for any suggestion,
Kay
grafiks
User
User
 
Posts: 2
Joined: Mon Jul 21, 2008 4:20 pm

Postby picojohn » Tue Jul 22, 2008 9:05 am

Hello Kay,

That is as low as you may go with the PS2203/4/5.

Regards
John
picojohn
Zen Master
Zen Master
 
Posts: 382
Joined: Mon Jun 11, 2007 1:10 pm

Postby grafiks » Tue Jul 22, 2008 12:09 pm

Thanks for the quick reply John,

so maybe I should upgrade to another Pico Product. How about the 3000/5000 series, will they do the job (could not find any specs on that topic in the manual).

Best regards,
Kay
grafiks
User
User
 
Posts: 2
Joined: Mon Jul 21, 2008 4:20 pm

Postby picojohn » Tue Jul 22, 2008 1:47 pm

Kay,

The PS5203/4 may be set to 0.03 Hz from within PicoScope 6.

Regards
John
picojohn
Zen Master
Zen Master
 
Posts: 382
Joined: Mon Jun 11, 2007 1:10 pm


Return to PicoScope 6 for Windows

Who is online

Users browsing this forum: No registered users and 0 guests