Test and Measurement Forum

USB TC-08 USAGE

Post any questions you may have about our current range of USB data loggers

USB TC-08 USAGE

Postby Sckicko » Fri Jul 04, 2008 7:08 am

Hello.
Ionly have a simple question which I can´t see on previous post, and it is that Can I run two USB TC-08 at same time on the same PC?

Thank you in advance.

Rafael
Sckicko
Newbie
 
Posts: 1
Joined: Fri Jul 04, 2008 7:04 am

Postby PeterF » Fri Jul 04, 2008 1:02 pm

Hi,
Yes, you can run up to 10 USB TC-08s on one PC under one instance of PicoLog. You will need 10 USB ports though. Plug-in as many as you want and when you start setup make sure you tick the box for "Use multiple converters". All connected TC-08s should be found by the ennumeration process, after which you set up all the channels you wish to use.
PeterF.
PeterF
Zen Master
Zen Master
 
Posts: 435
Joined: Thu Jun 07, 2007 10:53 am
Location: Cambridgeshire

Postby picojohn » Fri Jul 04, 2008 1:06 pm

Hello Rafael,

Please view the following Pico Knowledge Base entry:

http://www.picotech.com/support/kb/DataLoggers-kb215

Regards
John
picojohn
Zen Master
Zen Master
 
Posts: 382
Joined: Mon Jun 11, 2007 1:10 pm


Return to USB PC Data Loggers

Who is online

Users browsing this forum: No registered users and 0 guests