Manually set axes min/max values in views

Having problems ? let us know the details here
Post Reply
Nifty
User
User
Posts: 3
Joined: Thu May 02, 2024 6:59 am

Manually set axes min/max values in views

Post by Nifty »

Hi,

I am trying to configure the axes by use of keyboard instead of clicking and dragging.

For instance, in the below screenshots - i want all three axes to show 20-0 V, but it is really difficult to achieve that by dragging - and the three graphs are never equal.

I have tried clicking the axes and the zoom box to see if there is a way to enter the axes min and max values manually, but i have not found anything. Please dont tell me it is not possible.

I am using 7.1.29
Attachments
Y axes min value is all different
Y axes min value is all different
Same view, different axes
Same view, different axes

Martyn
Site Admin
Site Admin
Posts: 4549
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Manually set axes min/max values in views

Post by Martyn »

For each view, click on the associated Channel, select display and set the values to x2 and -25%
ChannelScaling.png
Martyn
Technical Support Manager

Nifty
User
User
Posts: 3
Joined: Thu May 02, 2024 6:59 am

Re: Manually set axes min/max values in views

Post by Nifty »

Thank you for replying, but when opening a saved file, this is not possible
Attachments
Skjermbilde 2024-06-19 072852.png

Martyn
Site Admin
Site Admin
Posts: 4549
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Manually set axes min/max values in views

Post by Martyn »

The controls are only active if the view with screen focus has that channel enabled. So in your original screenshot Scope 3 is the view with focus so the options will only work for Channel C, the green channel.
Martyn
Technical Support Manager

Nifty
User
User
Posts: 3
Joined: Thu May 02, 2024 6:59 am

Re: Manually set axes min/max values in views

Post by Nifty »

Great, thanks a lot!

This is what I needed

Post Reply