ADC-11/10 pin connections for 25W Dee type connector

Post any questions you may have about our current range of USB data loggers
Post Reply
memorris
User
User
Posts: 4
Joined: Thu Jul 03, 2008 11:16 am
Location: St. Ives Cambridge

ADC-11/10 pin connections for 25W Dee type connector

Post by memorris »

Does anyone know the pin connections for the 25 way Dee type connector used on the ADC-11/10? I cannot find any information in the manuals on the Pico Tech website and the only information I have is from the annotation on the box. That is:

pin: function
1: DO1
2: GND
3 - 13: CH1 - 11
14: DO2

What are pins 15 to 25? Are they connected to anything? Can they be grounded?

Thanks.
Martin

picojohn
Advanced User
Advanced User
Posts: 382
Joined: Mon Jun 11, 2007 1:10 pm

Post by picojohn »

Martin,

Pins 15 to 25 are open ciruit within the unit but, connected to ground if you use the ADC-11 Terminal Board.

Regards
John

memorris
User
User
Posts: 4
Joined: Thu Jul 03, 2008 11:16 am
Location: St. Ives Cambridge

Post by memorris »

John,

Thanks for the reply.

Regards
Martin

Post Reply