Test and Measurement Forum

ADC-11/10 pin connections for 25W Dee type connector

Post any questions you may have about our current range of USB data loggers

ADC-11/10 pin connections for 25W Dee type connector

Postby memorris » Thu Jul 03, 2008 11:23 am

Does anyone know the pin connections for the 25 way Dee type connector used on the ADC-11/10? I cannot find any information in the manuals on the Pico Tech website and the only information I have is from the annotation on the box. That is:

pin: function
1: DO1
2: GND
3 - 13: CH1 - 11
14: DO2

What are pins 15 to 25? Are they connected to anything? Can they be grounded?

Thanks.
Martin
memorris
User
User
 
Posts: 4
Joined: Thu Jul 03, 2008 11:16 am
Location: St. Ives Cambridge

Postby picojohn » Tue Jul 08, 2008 2:20 pm

Martin,

Pins 15 to 25 are open ciruit within the unit but, connected to ground if you use the ADC-11 Terminal Board.

Regards
John
picojohn
Zen Master
Zen Master
 
Posts: 382
Joined: Mon Jun 11, 2007 1:10 pm

Postby memorris » Tue Jul 08, 2008 4:05 pm

John,

Thanks for the reply.

Regards
Martin
memorris
User
User
 
Posts: 4
Joined: Thu Jul 03, 2008 11:16 am
Location: St. Ives Cambridge


Return to USB PC Data Loggers

Who is online

Users browsing this forum: No registered users and 0 guests