Issue with Windows sleep mode

Post any questions related to the new PicoScope 7 software
Post Reply
Posts: 0
Joined: Mon Jun 10, 2024 4:00 pm

Issue with Windows sleep mode

Post by romain145 »

When the computers wakes up from sleep, Picoscope 7 is still and won't try to reconnect unless a button is pressed. The keep alive mechanism doesn't seem to realize the connection with the Picoscope 2204A was lost.
What's worse is that it cannot resume the connection.
The Picoscope keeps initializing over and over again (a relay clicks twice every 3 seconds forever).
Disconnecting and reconnecting the device does not solve thse issue.
Closing and re-opening Picoscope 7 does work, but that's far from ideal.

Picoscope 7 T&M: version:
Picoscope 2004A.
Windows 11 23H2 on a desktop PC with a USB3.0 hub.

Post Reply