XY mode

Post any questions related to the new PicoScope 7 software
Post Reply
GMaiworm
Newbie
Posts: 0
Joined: Tue May 28, 2024 6:14 am

XY mode

Post by GMaiworm »

Hi all,

is it possible to select the channel for the x-axis?
I found that the x-axis is refered to channle A.

Willem43
Newbie
Posts: 1
Joined: Wed Jul 21, 2021 11:56 am

Re: XY mode

Post by Willem43 »

GMaiworm wrote:
Tue May 28, 2024 6:33 am
is it possible to select the channel for the x-axis?
I hope you can figure it out from the attached screen capture.
XY.png

GMaiworm
Newbie
Posts: 0
Joined: Tue May 28, 2024 6:14 am

Re: XY mode

Post by GMaiworm »

Hi Willem,

thanks for your prompt answer.
I use a picoscope 4823 (8channel) and the menu i see is this:
Attachments
Settings for views
Settings for views
picoscope.gif (10.1 KiB) Viewed 391 times

Martyn
Site Admin
Site Admin
Posts: 4539
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: XY mode

Post by Martyn »

Add a View - XY mode

then you get the option to specify the x axis.
Martyn
Technical Support Manager

Willem43
Newbie
Posts: 1
Joined: Wed Jul 21, 2021 11:56 am

Re: XY mode

Post by Willem43 »

As Martyn says.

My screen capture shows a XY view and it is selected under the ""Manage" heading in the Views tool.

GMaiworm
Newbie
Posts: 0
Joined: Tue May 28, 2024 6:14 am

Re: XY mode

Post by GMaiworm »

Thank you for your help.
It works.

Post Reply