PicoLog sampling rate (not any faster than 1 s)

Forum for discussing PicoLog
Post Reply
Justonethingtho
Newbie
Posts: 0
Joined: Mon May 06, 2024 8:24 pm

PicoLog sampling rate (not any faster than 1 s)

Post by Justonethingtho »

I'm having difficulty setting the PicoLog (for 2204A) to the 1 ms sampling rate; it simply isn't visible, unlike the older comments in the same software issue. Channel A (or B) is only set at a 1-second sample interval, resulting in valuable voltage data being skipped on the graph. The output file is also configured with samples of 1 second. I would like to match the output of PicoScope 7 for the same 1:1 voltage source. Did I miss something, or do I need a different PicoScope?

AndrewA
PICO STAFF
PICO STAFF
Posts: 413
Joined: Tue Oct 21, 2014 3:07 pm

Re: PicoLog sampling rate (not any faster than 1 s)

Post by AndrewA »

Hi,
The maximum sample rate is 1kS/s per channel with PicoLog 6 software for local recordings.
Or 1S/s per channel when set to log to the PicoLog Cloud.
Regards Andrew
Technical Specialist

Post Reply