Something incorrect in PS3000.dll???

Post your LabVIEW discussions here
Post Reply
LSNM
User
User
Posts: 2
Joined: Fri Jun 13, 2008 3:58 am

Something incorrect in PS3000.dll???

Post by LSNM » Fri Jun 20, 2008 5:32 am

Dear all,
I use Labview for my scope
The PS3000.vi is running like well but there is something incorrect in result .
When I changed No.of samples the time of waveform also change like changed TimeBase. I think No. of Samples is independent with the timebase like in PicoScope software. Anybody can help me resolve this problem?

gruntman
Advanced User
Advanced User
Posts: 109
Joined: Thu Sep 28, 2006 3:50 pm

Post by gruntman » Tue Jun 24, 2008 6:50 pm

LSNM,

The total time of the waveform is the sum of sample interval (Timebase) and the number of samples. You will notice as you increase the maximum samples in PicoScope the software will automatically decrease the time between samples (sample interval). HTH

Regards,

Richard Boyd
Crag Technologies, Inc
http://www.pc-oscilloscopes.com

Post Reply