Looking to see how to set up the TA167 current probe on a 4424A scope. I had found a VI labeled "PicoScope4000aExampleBlock_PicoConnect" and see there is some probe setup in that VI but I am not getting it to work with my current probe. Are there any additional drivers for setup of this?
The PicoConnect example is only for PicoScopes that support PicoConnect probes currently this only PicoScope 4444 and Automotive scopes.
For the 4424A you need to add code to scale the output for the TA167 as is done in PicoScope 6/7 software.
As the scope cannot detect the probe.
So use one of the other ps4000a examples to do this.