Zeroing a current probe for PicoLog

Forum for discussing PicoLog
Post Reply
MarioCrespo
Newbie
Posts: 0
Joined: Wed May 10, 2023 2:19 pm

Zeroing a current probe for PicoLog

Post by MarioCrespo »

Hello
I am using a PicoScope 4444 with voltage and current probes. The TA301 current probe recomends to zero it, and I found how to use it in the PicoScope 7 software, but I would want to do the same in PicoLog, so I can keep an accurate record.

Is there any way of zeroing it using PicoLog?
if not, there is any way of configuring PicoScope to record the measures with a lower frequency than the sampling frequency?

I am using PicoLog to record a sample every 500ms, sampling every 1ms. I would like to do the same calibrating the probe with PicoLog (I can resample with it) or resampling the measures with PicoScope (I can calibrate zero with it).

Thanks

Post Reply