PicoScope 7 Software
Available on Windows, Mac and Linux
PicoScope 7 as data logger
PicoScope 7 as data logger
Hello,
Is it possible to use PS 7 with a 4000 series to log AC voltage?
As far as I know with PS 6 one can only save the buffer.
Thanks, Paul
Is it possible to use PS 7 with a 4000 series to log AC voltage?
As far as I know with PS 6 one can only save the buffer.
Thanks, Paul
-
STT-Markus
- Newbie
- Posts: 0
- Joined: Mon May 08, 2023 9:00 am
Re: PicoScope 7 as data logger
Hi
I use PicoScope 7 Version: 7.0.121.14751 and PicoScope 5000 Series.
a function to save long-term measurements as csv would be very helpful
I use PicoScope 7 Version: 7.0.121.14751 and PicoScope 5000 Series.
a function to save long-term measurements as csv would be very helpful
Re: PicoScope 7 as data logger
Hi,
I was told by Pico support to use the Picolog 6 software with the PicoScope oscilloscope.
Haven't tried it yet but hope this helps.
Paul
I was told by Pico support to use the Picolog 6 software with the PicoScope oscilloscope.
Haven't tried it yet but hope this helps.
Paul
Re: PicoScope 7 as data logger
PicoLog would be useful for logging the values of slow changing signals over time. However if you are wanting to save the calculated measurements that are performed on the traces it would depend upon the measurements you need to save, the speeds of the signals, and the timeframe over which to do this.
One area worth investigating is the DeepMeasure feature in PicoScope 7 which can perform waveform cycle measurments on the current buffer, or all buffers, and these can be exported to CSV post capture.
One area worth investigating is the DeepMeasure feature in PicoScope 7 which can perform waveform cycle measurments on the current buffer, or all buffers, and these can be exported to CSV post capture.
Martyn
Technical Support Manager
Technical Support Manager