Using a Picoscope 4424A and Picoscope 7 PS4000A API. If I set up a dual trigger situation with a magnitude trigger on channel D and a pulse width trigger on channel A, when does the pulse width counting begin? Does the pulse width counting begin when the channel D triggers or does the pulse width begin with a independent trigger level?
My gut understanding is that this is not possible with Picoscope. The Window and PWQ must be on the same channel.
Magnitude trigger on one channel with PWQ on another
Re: Magnitude trigger on one channel with PWQ on another
The pulse width trigger would be setup to run on a particular channel, all timing would be related to this channel. This can be used in a logic trigger with a trigger event on another channel. so that both events meet the logic condition.
If this sounds like what you are looking for, but are unable to get it to work, then please email your code to support@picotech.com and one of the team can take a look for you.
If this sounds like what you are looking for, but are unable to get it to work, then please email your code to support@picotech.com and one of the team can take a look for you.
Martyn
Technical Support Manager
Technical Support Manager