PS2405A got undesired signal using labview

Having problems ? let us know the details here
Post Reply
adpbtm
Newbie
Posts: 1
Joined: Tue Mar 21, 2023 7:08 am

PS2405A got undesired signal using labview

Post by adpbtm »

Hello,

I have PS2405A that working good using Picoscope 7 T&M software.
But got nothing on example labview. (labview 2018)
Could you help me to guide how to setting as picoscope 7 T&M.

thanks,
Adpbtm
Attachments
using Picoscope2000aExampleBlock.JPG
using Picoscope 7 T&M.JPG
Top
Martyn
Site Admin
Site Admin
Posts: 4350
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: PS2405A got undesired signal using labview

Post by Martyn »

That is the low level noise that is usually present on the inputs. If you are waiting for a trigger and want to capture data when that happens you need to set the Auto Trigger Time in the top right to 0. Currently it is set to 1 second so if no trigger occurs it will just capture what is happening after 1 second, so the noise.
Martyn
Technical Support Manager
Top
Post Reply

Return to “Getting Started”