PicoSoft 7 manual
PicoSoft 7 manual
Is there a manual explaining how to use PicoSoft 7? Whilst it looks like a major advance on version 6, I am finding it almost impossible to use. For example I would like to measure the average value between the rulers but it only gives me the average for the whole wave form. I would also like to save a sub set of the whole wave form as identified by the rulers but the "Choose range" feature in the Save function does not appear to recognise any input.
Re: PicoSoft 7 manual
There is no manual for PicoScope 7 and it isn't something we are currently planning to produce.
With respect to measuring between cursors if you click on the measurement you will get a pop up window that allows the setting of additional parameters. We are changing measurements as we add new ones so that this will pop up by default when adding a measurement.
As with PicoScope 6 it is not possible to select a subset of data from the waveform to save by using the rulers, the choosing in the Save Dialog references waveform buffers.
With respect to measuring between cursors if you click on the measurement you will get a pop up window that allows the setting of additional parameters. We are changing measurements as we add new ones so that this will pop up by default when adding a measurement.
As with PicoScope 6 it is not possible to select a subset of data from the waveform to save by using the rulers, the choosing in the Save Dialog references waveform buffers.
Martyn
Technical Support Manager
Technical Support Manager
Re: PicoSoft 7 manual
"There is no manual for PicoScope 7 and it isn't something we are currently planning to produce."
Hmmm. Very bad. I had also difficulties. For instance, the "Sampling" setting is where?
Hmmm. Very bad. I had also difficulties. For instance, the "Sampling" setting is where?
Re: PicoSoft 7 manual
You can find this in the sampling tab of the Scope settings window as shown here
Martyn
Technical Support Manager
Technical Support Manager