Serial decoding threshold to become visible?

Having problems ? let us know the details here
Post Reply
Posts: 1
Joined: Sun Feb 26, 2023 7:50 am

Serial decoding threshold to become visible?

Post by ufneeme »

with both PicoScope 6 and 7 sw I have the same problem - I cannot see the decoding threshold level on the screen, right on the waveform. Is it somehow possible? I yes, can it be dragged up and down with the mouse?

The hysteresis levels could be visible too, but this is much less important.

With PicoScope 7 I have an additional problem - the threshold seems to be limited to +/- 500mV only. Whatever unit I select, on the touch of the threshold slider the selected unit returns to be mV.

Post Reply