TC-08 Gives Reading With No Thermocouple

Forum for discussing PicoLog
Post Reply
IKONIFY
Newbie
Posts: 0
Joined: Fri Feb 17, 2023 1:58 pm

TC-08 Gives Reading With No Thermocouple

Post by IKONIFY »

Using TC-08 to take temperature measurements using type k thermocouples.

When k thermocouple disconnected still get a measurement. This is I believe cold junction temperature and noise.

Is there anyway to test/check when taken measurement that it is actually using thermocouple?

Steve0
Newbie
Posts: 0
Joined: Tue Jan 24, 2023 2:29 pm

Re: TC-08 Gives Reading With No Thermocouple

Post by Steve0 »

There isn't I don't think. Best thing to do is force a temperature change on the probe tip and see if it reacts on PicoLog.

Post Reply